Flower Fountain – Getting Started

Thank you for having purchased a Catit Flower Fountain!

On this page you can find all information you need to get your cat successfully started with the brand-new Flower Fountain. Some cats get a little too curious when they first see their new Flower Fountain and use their paws to swat at the streams, so be aware that your floor could get a little wet during those first few days.

What to do first?

Before assembling the Flower Fountain, please make sure to disassemble and rinse the pump.
Also, thoroughly rinse the Flower Fountain filter to prevent black sediment from leaking into the water inside your fountain.

How do I (dis)assemble my Flower Fountain?

Need more information? Download the instruction manual.

How do I remove the flower bud?

First, take the flower out of the fountain and hold it upside down. At the bottom of the flower are 3 small, yellow rims. Use a pen or screwdriver to push these rims inwards. Finally, pull the yellow flower bud upwards to remove it.

Maintenance

How do I clean the Flower Fountain?

Watch the video above for cleaning instructions.
All components can be washed with warm water, using a soft sponge and dishwashing soap. Never use aggressive detergents or an abrasive sponge.

How do I clean the Flower Fountain pump?

The pump should be removed from the fountain and disassembled for cleaning on a biweekly basis. For instructions, watch the video above. Rinse each part separately with water before reassembling.

Which replacement filters do I need?

The Flower Fountain should be used with the Triple Action Filters.

Why is there black sediment in my fountain?

The black sediment is active carbon that leaked from the filter. The black discharge can be prevented by rinsing the filter thoroughly under the tap for several minutes before placing it inside the Flower Fountain.