More help & advice topics for the Catit PIXI Stainless Steel UV-C Fountain:
Note: The LCD display turns on when the sensor is triggered and will automatically go to sleep.
Charging:
The Catit PIXI Stainless Steel UV-C Fountain has a built-in battery and can operate without the power cord once fully charged. If the fountain is powered on, inserting the charging cable enables continuous mode, with a non-interrupted water flow.
Inserting the power cable when the fountain is off will still allow the device to charge.
Button controls:
Press and hold the button on the electronic unit for 3 seconds to turn the Catit PIXI Stainless Steel UV-C Fountain on and off.
Sensor Mode (Default):
In sensor mode (the default mode), the Catit PIXI Stainless Steel UV-C Fountain will provide running water for 12 seconds when your cat or dog approaches the fountain, helping to conserve energy.
Timed Mode:
In timed mode, the Catit PIXI Stainless Steel UV-C Fountain will provide running water for 12 seconds every 15 minutes, for optimal water freshness.
Continuous Mode:
To enable continuous mode, ensure the Catit PIXI Stainless Steel UV-C Fountain is plugged into the wall socket. This mode provides constant, uninterrupted water flow and UV-C water filtration.
Water level:
The Catit PIXI Stainless Steel UV-C Fountain can indicate water levels ranging from 99% to 30%. When the water level drops below the sensor threshold (30%), the pump will stop operating even if some water is still present.
If the fountain displays a water level of 30%, the water level is too low for the pump to access, and the reservoir should be refilled.
